Loading...
Thursday 26 September 2013

Cleanomat cvt-3 and cvt-4


CLEANOMAT system consists of different cleaners with the same structure and available in 3 different categories i.e. single roller, 3 rollers and 4 rollers. All the rollers are equipped with mote knives with direct suction and are mounted with pins, needles, saw tooth wires or fine saw tooth wires depending upon different models of CLEANOMAT machines. Due to progressive acceleration of subsequent rollers, transfer of fibre from one roller to the next is smooth & gentle. The wastes separated at mote knives are sucked off immediately. The setting of the deflector blade in front of the mote knives determines the degree of cleaning with minimum lint loss.

Three roller Cleanomat CVT 3
This machine has a very wide range of application as fine openers. The CVT 3 cleaner is a combination of spiked roll, coarse saw- tooth roll and a fine saw-tooth roll. The CVT 3 machine is therefore recommended for medium cottons where degree of opening and cleaning required is not very severe. All these rollers work in combination with mote knives and suction hood to remove fine trash impurities in all types of cottons very effectively. Due to its characteristics, the cleaner CVT 3 is normally recommended for coarse medium type cottons having considerable amount of trash content. 

Four roller Cleanomat CVT 4
The Cleanomat CVT 4 the most efficient cleaner having a combination of spiked roll, coarse saw-tooth roll, medium saw-tooth roll and fine saw-tooth roll. Its cleaning performance equals that of 3 or 4 conventional cleaners and- hence is recommended for coarse cottons with very hightrash content (like cottons for open-end spinning and coarser yarn counts).


Main objective:
  • Opening
  • Cleaning
Main parts:
  • Feed conveyor belt
  • Feed roller
  • Spike beater
  • Coarse beater
  • Fine coarse beater
  • Sensors
Ø  Measure the beaters speed


Technical information:
  • Year of manufacture    1994
  • Company                                 Truetzschler
  • No. of cylinder/beater 03
  • Diameter of beater                  250mm
  • Inner frame width                   1600mm
  • Max. production                     440kg/h
  • No. of drivers              04
  • Feed belt speed                       0.76~15.2 m/min
  • Beater speed
Ø Spike beater                      1100 rpm
Ø Coarse beater                    2100 rpm
Ø Fine coarse beater 3400 rpm

  

0 comments:

Post a Comment

 
TOP